Screw-on Bull Heads (1¼ – 2″ Kit)

These larger bull heads are compatible with the 1¼ – 2″ puller kit and are made for 1¼”, 1½”, or 2″ pipe. They are machined to take a 3/4 – 10 threaded cable stud, which is pressed onto one end of the cable. The other end of the cable is brazed, so that it will not fray. Back of the bull heads are FEIP thread. The pushing side of the bullhead is machined to go into the existing service pipe about one inch in order to center it for pushing.