Adjustable Pipe Support

Heavy duty pipe support stands for horizontal piping feature 193 GR. B7 stems that are fully adjustable. Top and bottom assemblies can be locked in place after adjustment.

Heavy steel base plates, ⅜″ x 8″x 8″ for 2″ through 12″ pipe and ⅜″ x 12″ x 12″ for 14″ thru 24″ pipe. All base plates have four ⅜″ holes on each corner for mounting to floor. All components are fully welded carbon steel, or 304 stainless steel construction. Standpipe for 2″ through 12″ pipe is 2″ schedule 40. Standpipe for 14″ through 24″ pipe is 2½″ schedule 40 pipe. Supports have ⅜″ cup point hardened locking set screws on top and bottom assemblies to lock and hold the standpipe after height adjustment.

All stands have a minimum clearance of 10″ from the ground to the bottom of the pipe. Deduct 4″ for support pipe. A 1″ hex head nut is supplied to lock the stem in place. Materials comply to American National Standard ANSI/MSS SP-58. Each pipe support will support 5,000 lbs. Liners for steel and PVC pipe can be supplied upon request.