|
About the product PLEASE NOTE BELOW***HYDRANT MARKERS WILL BE POWDER COATED APRIL 2019.*** Enamel coated flags with reflective glass beads will be discounted until they are all gone. Our 4' hydrant markers have either 3/8 or 1/2 inch rebar shafts, and a 4-1/2" round 16 gauge steel disc welded to the shaft. Currently coated with Safety orange enamel paint,and the disc is then coated with reflective glass beads. Attachment is a 1/2 loop design for mounting to a hose nozzle. This lets the flag drop out of the way when firefighters or water department personel loosen the hose nozzle. Flags are individually wrapped 10 in a bundle. NEW FOR SPRING OF 2019 HYDRANT MARKERS WILL BE POWDER COATED (SAFETY ORANGE) AND SUPPLIED WITH 2-1 INCH SQUARE REFLECTIVE STICKERS, WHICH CAN BE APPLIED,OR NOT,TO EACH FLAG,BY THE END USER. CUSTOM COLORS AND OR REFLECTIVE GLASS BEAD ON FLAGS CAN BE DONE WITH AN ADDITIONAL COST AND LEAD TIME. Our markers are made in our shop and Powder Coated locally. MADE WITH PRIDE IN TH USA |
Product info
Product Number |
Description |
Weight |
21001 | 48" Hydrant Marker w/3/8 rebar shaft
non reflective
wgt 2 lbs |
lbs |
21002 | 48" Hydrant Marker w/1/2" rebar shaft
non reflective
wgt 3 lbs |
lbs |
21001RS | 48" HYDRANT MARKER 3/8 REBAR SHAFT W/REFLECTIVE STICKERS
WGT 2 LBS |
lbs |
21002RS | 48" HYDRANT MARKER 1/2" REBAR SHAFT
W/REFLECTIVE STICKERS
WGT 3LBS |
lbs |
Made with pride in the USA!
Additional Photos
|
|
|
|